bet亚洲版登陆|网站主页

bet亚洲版登陆

ZD2C Contact Resistance Tester


Resistance Measurement


ZD2C Contact Resistance Tester 100A/200A
INTRODUCTION
The risk of overheating is becoming more serious due to the fact that today’s distribution networks have to carry heavier loads. Checking contact resistance at regular intervals detects faults before they cause overheating. Contact resistance tester is used to measure contact resistances of circuit breakers, disconnecting switches, earthing switches, bus joints, bushing contact joints and welding joints. Also for any low resistance measuring application. The tester provide 100A and 200A selectable DC current, and the voltage measurement gets the voltage of tested object.The method of calculate resistance according to Ohm's law. (R=U/I)
FEATURES
l Setting current output time between 1s to 60s.
l Save the device’s series number, for checking the result conveniently.
l Display output current,output time and resistance during testing.
l Saving 100 test results in tester memory.
l Built-in clock record the date.
l The stored result includes device’s number, testing time and resistance.
SPECIFICATIONS
ZD2C
Test current: 100A and 200A selectable
Output power: 100A mode: 1kW
             200A mode: 2kW
Measuring range: 100A mode: 0.1μΩ to 20000μΩ
               200A mode: 0.1μΩ to 10000μΩ
Accuracy: ± 0.5% rdg ± 0.2μΩ
Resolution: 0.1μΩ to 999.9μΩ,Resolution: 0.1μΩ
           1mΩ to 10mΩ,  Resolution: 1μΩ
          10mΩ to 20mΩ,  Resolution: 10μΩ
Ammeter accuracy: ± 0.5% rdg ±0.1A
Dimensions: 403×330×178mm    Weight: 8kg
 
 
General
Memory capacity: 100 results
Power supply: 198 to 264VAC  47 to 63Hz
Environment:-20 to 50℃
Humidity ≤90%RH   Non-condensing